The Ghost Immobiliser
Immobilisers are a potent weapon in the fight against car theft. They prevent the vehicle from starting if it doesn't have a key fob. They also work well to stop hotwiring or other traditional forms of vehicle theft. Innovative methods like relay theft or key cloning are becoming more prevalent.
The Ghost Immobiliser has been designed to counter these new trends and make your vehicle undetectable. It doesn't rely on LED indicators, radio signals or key fobs. It is quiet and stealthy.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network inside your vehicle to prevent key cloning and theft. It is an TASSA approved product and is recognized by insurance companies. It is almost undetectable by thieves and operates silently. It makes use of buttons on your steering wheel and center console to generate an individual pin-code sequence you have to enter before you can begin the vehicle. You can create up to 20 different sequences to increase security. It's easy to install and doesn't require any additional hardware.
To ensure the best possible outcomes, it is recommended that you use a reputable CAN-immobiliser installer who specializes in your vehicle type. Ideally, they will have a workshop in your area where you can visit to have your installation completed. There is also various tools and equipment that can assist you in the installation. They will come with basic hand tools, multimeters insulation tape and heat shrink tubing for protecting the connections. A user manual will provide instructions specific to the wiring of your vehicle.
Before starting the installation Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. It is essential to verify the location of the CAN H and CAN L wires, as incorrect identification could lead to unintentional system integration. It is also a good idea to label or mark the wires. Finally, make use of a multimeter to confirm that the power source identified provides a consistent 12V supply.
Advanced thieves can use various methods to bypass the Ghost Immobiliser, including jamming and spoofing signals. These methods are based on amplifying signals from the key fob to the electronic controller unit. With the latest anti-jamming technology and constant monitoring your vehicle will be protected from these sophisticated attacks.
Security Improved
Ghost immobilisers provide an additional layer of protection to safeguard your car from theft. It uses a PIN code security system that can be activated by pressing buttons on your steering wheel or dashboard making it difficult for thieves to access the device and steal your vehicle. The device is designed to be hidden inside your vehicle. It has no lights, or other signals to alert a potential burglar to its presence. It communicates with your vehicle's ECU via the data bus, so it is not susceptible to the same hacking or relay attacks that could disable conventional security systems.
It's a fantastic option for those who own expensive cars which are at greater risk of theft because of their price and popularity. Its advanced features shield your car from key cloning and ECU swapping. Ghost immobilisers can be connected to apps, which means you can arm or disarm easily. They may also include a service/valet setting that allows you temporarily deactivate the immobiliser while your vehicle undergoes repairs or service.
Another advantage of a ghost immobiliser is that it does not require any cutting of wire. This is a great feature, especially if you own a brand newer vehicle that does not have any built-in immobiliser technology. Certain systems might also be capable of integrating with a GPS tracking device, thereby providing additional security for your vehicle. Having a GPS tracker can aid in reducing your insurance premiums. If you decide to purchase a ghost immobiliser, ensure that it is TASSA-certified and that an experienced installer installs the device for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to be compatible with all major makes and models of vehicles protecting your prized possessions from theft. It generates a unique pin number using buttons on your steering wheel, console, or door panels. You must enter this code before you are able to drive. The system is tamper-proof and undetectable. It's also comes with a three-year guarantee. It is also fully endorsed by insurance companies. This means that you can reduce your cost of insurance.
In contrast to standard immobilisers that utilize your key fob to control the ignition however, the Ghost system is connected directly to the engine controller unit via the CAN data bus. It is almost impossible to remove, disable or hack. The Ghost system can also be integrated with an iPhone app to monitor remotely and management.
You can create a PIN code that is simple for you to remember but mathematically, it is impossible for thieves to guess. The PIN can be customized and changed at any time so that you can keep your car safe even when you park it on the street or in a parking lot. You can also choose a valet or service mode in case you need someone else to drive your vehicle for a short period such as when it's in the garage for maintenance. This feature is also a great way to prevent your car from being stolen by a shady mechanic. To ensure your security, you can opt for a Ghost call alert to notify you if your car is moving or if it's been moved.
Convenience
The ghost immobiliser is an effective security device that protects your vehicle from common methods of theft such as key cloning, key stealing and relay attacks. It works by connecting with the car's data network CAN and blocking communication with the engine ECU. This makes it very difficult for thieves to hack or clone your vehicle.
After installation, you'll need to enter a PIN up to 20 digits in length using the buttons on the dashboard and the steering wheel to start the car. The system is completely hidden and thus unnoticeable to thieves. It doesn't emit radio frequency signals. It is also able to be configured to allow a user-changeable PIN code, which adds security. The system is also designed to avoid cutting the circuit and makes it virtually impossible to alter.
If you get lost in your PIN, there are systems that let you communicate with the immobiliser through an app on your smartphone to disarm it immediately. Some even come with a service/valet mode that allows you to start your vehicle temporarily, for instance, when you need to drop it off for servicing or valet parking.
The Ghost Immobiliser is also undetectable to thieves because it doesn't transmit radio signals, which is a significant advantage over other aftermarket vehicle security systems. It is also simple to use and doesn't require complicated wiring. You can also use it in conjunction with a dash cam for added safety. Dash cams include the Thinkware F70, which features clear & sharp 1080p HD dashcam footage as well as Format Free Technology and parking mode. The system can also be wired for optimum performance and durability.
Installation
It's crucial to choose the most effective immobiliser ghost to safeguard your vehicle from thieves. This device can stop car thefts by blocking the communication between key fobs as well as the engine controller unit. This stops thieves from stealing the signal and cloning your key fob in order to start your vehicle. It can also detect the presence of a tamper and notify the owner of the vehicle.
The device is simple to install and can be used with the existing systems of your vehicle. ghost 2 immobiliser review requires no modification to the wiring in your vehicle and can be concealed in a concealed area, like under the dashboard. Follow the instructions in the manual to ensure that the device is properly installed. After installation, it's crucial to test the system. This will ensure that the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed in your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to take it off or disable the system. Installation generally takes between 2 and 3 hours.
During the installation process it is recommended that you review the wiring diagram of the model of your vehicle. This will enable you to identify the CAN High and Low wires. Low wires that are required to connect your Ghost to the engine of your vehicle. Check all connections to ensure they are secure and insulated.
Once the installation has been completed, you can start using the Ghost Immobiliser as normal. It will turn off the ignition of your vehicle if it is not able to start it with the correct PIN, which is something you can enter yourself. The immobiliser ghost can be set to Service/Valet Mode for when you need your vehicle cleaned or valet parking.